Troubleshooting 381
11
11
11
11
11
11
11
11
11
11
11
11
The printout position is not correct
New :vary according to product (eg. Stilt /Harrier only)
Misalignment of colors
New :vary according to color product ( eg. Piculet /Puffin only)
Graphics do not print correctly
Cause What to do
The page length and margins may
be set incorrectly in your
application.
Make sure that you are using the correct
page length and margin settings in your
application.
The Paper Size setting may be
incorrect.
Make sure the correct paper size is set in
the Tray Menu on the control panel.
MP Tray Size setting may be
incorrect.
When loading paper for which the size is
not specified with Auto setting, specify
the correct paper size on the MP Tray Size
setting in the Tray Menu on the control
panel.
Cause What to do
The registration position of each
color may have shifted while the
printer was being shipped or moved
to a new location.
Check the color registration and adjust
the alignment if necessary. See "Checking
Color Registration" on page 268 for
instructions.
Cause What to do
The printer emulation setting in your
application may be incorrect.
Make sure that your application is set for
the printer emulation you are using. For
example, if you are using the ESC/Page
mode, make sure that your application is
set to use an ESC/Page printer.
To Next Page
Loading...
Need help?
General