Cleaning and Transporting the Printer 353
10
10
10
10
10
10
10
10
10
10
10
10
❏ Interface cables
❏ Loaded paper
❏ Photoconductor unit
❏ Installed options
2. Attach the protective materials onto the printer, then repack
the printer in its original box.
Checking color registration
New :vary according to color product ( eg. Piculet /Puffin only)
If you transported your printer for a long distance, you need to
check the color registration for possible misalignment. For
instructions, see "Checking Color Registration" on page 268.
For short distances
Always pay attention to the following handling precautions when
you need to move the printer for short distances.
If you are moving the printer on its own, two people should lift
and carry the printer.
Follow the steps below to move the printer for short distances.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
❏ Loaded Paper
❏ Photoconductor unit
❏ Installed options
To Next Page
Loading...
Need help?
General