200 Using the PostScript Printer Driver
7. Install the printer driver by following the on-screen
instructions. See "Installing the PostScript printer driver for
the parallel interface" on page 196 for details.
Installing the PostScript printer driver for the
network interface
New :including the information about Windows 95 / Network is standard or option
See the appropriate sections below according to your operating
system, and follow the instructions to install the PostScript printer
driver for the network interface.
Note:
❏ Set the network settings before installing the printer driver. Refer
to the Network Guide that comes with your printer for details.
❏ Turn off all virus protection programs before installing the printer
software.
For Windows XP or 2000 users
1. Make sure that the printer is turned on. Insert the printer
software CD-ROM into your CD-ROM drive.
2. For Windows 2000, click Start, point to Settings, and click
Printers. Then double-click the Add Printer icon.
For Windows XP, click Start, point to Printer and Faxes, and
click Add a printer in the Printer Tasks menu.
3. The Add Printer Wizard appears. Then click Next.
4. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug
and Play printer check box.
To Next Page
Loading...
Need help?
General