54 Paper Handling
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.
EPSON Color Laser Transparencies
New :Color only/with control panel/ including the information about duplex printing/quote the information from similar product (how to load transparencies)
Epson recommends the use of EPSON Color Laser
Transparencies.
Note:
Duplex printing is not available for transparencies.
Transparencies can be loaded into the MP tray only. When using
transparencies, you should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.
Paper Size: A4
Paper Source: MP Tray (up to 150 sheets or up to 15
mm thick stack)
Lower Cassette (up to 550 sheets or
up to 61 mm thick stack in each
cassette)
Paper Type: Semi-Thick
Paper Size: A4 or LT
Paper Source: MP Tray (up to 15 mm thick stack)
Paper Type: Transparency
To Next Page
Loading...
Need help?
General