Installing Options 289
8
8
8
8
8
8
8
8
8
8
8
8
Note for Macintosh users:
When you have attached or removed printer options, you need to delete
the printer using Print Setup Utility (for Mac OS X 10.3), Print
Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9),
and then re-register the printer.
Removing the optional paper cassette unit
Perform the installation procedure in reverse.
Memory Module
New :quote the information from the similar product / confirm whether SIMM can be installed/ delete note text in hostbase product (except new hostbase).
By installing a Dual In-line Memory Module (DIMM), you can
increase printer memory up to 640 MB. You may want to add
additional memory if you are having difficulty printing complex
graphics.
Installing a memory module
Follow the steps below to install an optional memory module.
c
Caution:
Before you install a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
Note:
If the optional Hard Disk Drive is installed, remove it before installing
a memory module.
To Next Page
Loading...
Need help?
General