Epson AcuLaser C4200DN - Emulation Menu; Printing Menu

Using the Control Panel 221
7
7
7
7
7
7
7
7
7
7
7
7
Emulation Menu
New :Emulation only/ confirm the product specification
Use this menu to select the printer emulation mode. You can
specify different emulations for each interface; in other words, for
each computer you connect the printer to. Since each emulation
mode has its own specific options, make settings in the ESC P2,
FX, or I239X menu, as necessary. The settings you can choose from
are the same for every interface.
*1
Available only when an optional Type-B interface card is installed.
*2
Available only when an optional P5C module is installed.
Printing Menu
New :confirm the product specification
This menu allows you to make standard print settings, such as
Page Size and Orientation, when printing from an application or
operating system that does not support your printer driver. Be
sure to use the printer driver to make these settings whenever you
can, since settings made on your computer always override these
settings.
Item Settings (default in bold)
Parallel Auto, ESCP2, FX, I239X, PS3, P5C
*2
USB Auto, ESCP2, FX, I239X, PS3, P5C
*2
Network Auto, ESCP2, FX, I239X, PS3, P5C
*2
AUX*
1
Auto, ESCP2, FX, I239X, PS3, P5C
*2