92 Using the Printer Software with Windows
6. If you delete all form data, click the All button, then click
Delete. If you want to delete some specific data, click the
Selected button, enter the form name in the Form Name edit
box, then click Delete.
Note:
❏ If you need the list of the registered form data, click Print List to
print it and confirm the form name. Also, if you need a sample
print-out of the form data, enter the form name and click the
Print Sample button.
❏ You can use the Browse button if the printer is connected
through a network. Form names registered to the HDD are
displayed by clicking the Browse button.
7. Click Back.
8. Click OK to close the dialog box.
Making Extended Settings
You can make various settings in the Extended Settings dialog
box. To open the dialog box, click Extended Settings on the
Optional Settings tab.
To Next Page
Loading...
