Epson AcuLaser C4200DN - Duplex Printing

Using the Printer Software with Macintosh 163
5
5
5
5
5
5
5
5
5
5
5
5
4. Select the PICT file, then click Open.
5. Type the file name in the Name box, then click Save.
Note:
To remove the saved watermark, select it from the List box, then click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box, then click OK.
Duplex printing
New :Duplex is standard or option.
Duplex printing prints on both sides of the paper. You can also
do duplex printing manually without using the Duplex Unit.
When printing for binding, the binding edge can be specified as
required to produce the desired page order.