294 Installing Options
8. Fasten the circuit board tray with the three screws.
9. Reattach the cover.
10. Reconnect all the interface cables and the power cord.
11. Plug the printer’s power cord into an electrical outlet.
12. Turn on the printer.
To confirm that the option is installed correctly, print a Status
Sheet. See "Printing a Status Sheet" on page 377.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings
manually in the printer driver. See "Making Optional Settings" on page
95.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete
the printer using Print Setup Utility (for Mac OS X 10.3), Print
Center (for Mac OS X 10.2 or below), or Chooser (for Mac OS 9),
and then re-register the printer.
To Next Page
Loading...
Need help?
General