Safety Instructions 15
❏ Because the printer weighs approximately 34.6 kg (76.3 lb)
with consumable products installed, one person should not
lift or carry it. Two people should carry the printer, lifting it
by the correct positions as shown below.
❏ Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the printer
has been in use, the fuser and the surrounding areas may be
very hot. If you must touch one of these areas, wait 30 minutes
to allow the heat to subside before doing so.
11
2
2
To Next Page
Loading...
