22 Safety Instructions
Laser safety labels
w
Warning:
The performance of procedures and adjustments other than those
specified in the printer’s documentation may result in hazardous
radiation exposure.
Your printer is a Class 1 laser product as defined in the IEC60825
specifications. The label shown is attached to the back of the
printer in countries where required.
Internal laser radiation
This is a Class III b Laser Diode Assembly that has an invisible
laser beam. The printer head unit is NOT A SERVICE ITEM,
therefore, the printer head unit should not be opened under any
circumstances. An additional laser warning label is affixed to the
inside of the printer.
CDRH regulations
For information about the Center for Devices and Radiological
Health of the U.S. Food and Drug Administration, see "Standard
and approvals" on page 417.
Max. Average Radiation Power: 10 mW at laser aperture
Wavelength: 775 to 799 nm
To Next Page
Loading...
Need help?
General