Using the Control Panel 249
7
7
7
7
7
7
7
7
7
7
7
7
The printer is canceling all print jobs in the printer memory,
including jobs the printer is currently receiving or printing. This
message appears when the + Cancel Job button has been
pressed down for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message
appears when the + Cancel Job button has been pressed and
released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Can’t Print
The print data is deleted because it is incorrect.
Make sure that the appropriate paper size is set and appropriate
your printer driver is used.
Can’t Print Duplex
The printer has encountered problems during duplex printing.
Make sure you are using an appropriate type and size of paper
for the Duplex Unit. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the
N Start/Stop button will print the rest of the print job on only one
side of the paper. Press the + Cancel Job button to cancel the
print job.
Check Transparency
You have loaded media other than transparencies when the Paper
Type setting in the printer driver is Transparency, or
transparencies are loaded when the Paper Setting in the printer
driver is not set to Transparency. Paper is jammed at the MP tray.
To Next Page
Loading...
Need help?
General