Epson AcuLaser C4200DN - Page 373

Troubleshooting 373
11
11
11
11
11
11
11
11
11
11
11
11
w
Warning:
Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.
c
Caution:
Do not touch the rollers inside the printer.
10. Reinstall the photoconductor unit, making sure the posts on
the sides of the unit slide into the slots.
w
Warning:
Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot.