60 Paper Handling
Note:
❏ For Windows, access the printer driver, then select
User-Defined Size from the Paper Size list on the Basic
Settings tab. In the User Defined Paper Size dialog box, adjust
the Paper Width, Paper Length, and Unit settings to match
your custom paper. Then click OK and your custom paper size
will be saved.
❏ For Macintosh, access the printer driver, click Custom Size in
the Paper Setting dialog box. Then click New, adjust the Paper
Width, Paper Length, and Margin settings to match your
custom paper. Then enter the setting’s name, and click OK to
save your custom paper size.
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 219.
❏ If you cannot use the printer driver as explained above, make
this setting at the printer by accessing the control panel’s
Printing Menu and selecting CTM (custom) as the Page Size
setting.
Paper Source: MP Tray (up to 15 mm thick stack)
Paper Type: Plain, Semi-Thick, Thick or Extra
Thick
To Next Page
Loading...
