88 Using the Printer Software with Windows
Register the form overlay data on the Hard Disk Drive
Only a network administrator using Windows XP, 2000, or Server
2003 is allowed to register the form overlay data on the optional
Hard Disk Drive, using the following steps.
Note:
❏ The form name must use only the characters shown below. A - Z, a
- z, 0 - 9, and ! ’ ) ( - _ %
❏ If you are using the color printer driver, monochrome form overlay
data created in the black mode is not displayed.
1. Prepare the form overlay data to register on the local PC Hard
Disk Drive.
2. Log in to Windows XP, 2000, or Server 2003 as an
administrator.
3. For Windows 2000, click Start, point to Settings, and then
click Printers.
For Windows XP or Server 2003, click Start, point to Control
Panel, and then double-click the Printers and Faxes icon.
4. Right-click the EPSON AL-C4200 Advanced icon and then
click Properties.
5. Click the Optional Settings tab.
6. Click Register. The Register to HDD dialog box appears.
To Next Page
Loading...
Need help?
General