73
Chapter3 Handling
6 Media Saving (for continuous label only)
Select a media saving setting. The [Media Saving] function eliminates margins from one-page print data
to suppress wasting paper.
• No Saving: Paper is advanced before and after printing causing top and bottom margins on the print-
out.
• Eliminate Lower Margin: Paper is not advanced after printing to eliminate bottom margin from the
printout.
• Eliminate Lower and Upper Margin: Paper is not advanced before and after printing to eliminate both
top and bottom margins from the printout.
7Media Type
Select the paper type. ("Paper Specifications" on page 215)
c
IMPORTANT
When the [Media Saving] function is enabled, printing a barcode using the barcode
font of the printer driver is disabled.
Top margin
Print data
Bottom margin
Paper feed direction
If you set the printer to cut paper in the [Settings for Paper Handling After Print]
setting, paper length of at least 15 mm is required. When the length of print data is less
than 15 mm, the margins are not eliminated even if you have set to [Eliminate Lower
Margin] or [Eliminate Lower And Upper Margin].
If your print data includes labels of various sizes, paper length to print each of the
labels can be optimized by setting the largest label size as the label (page) size, and
using the [Media Saving] function.
Print data length
Margin
Minimum paper length:
15 mm
To Next Page
Loading...
Need help?
General
