74
Chapter3 Handling
8 Print Quality
Select the print quality.
When [Media Type] is [Matte Paper] or [Synthetic]
• High Speed: 300 x 600 dpi
• Speed: 600 x 600 dpi
• Standard: 600 x 600 dpi (initial setting)
• Quality: 600 x 1200 dpi
When [Media Type] is [Glossy Paper], [Glossy Film], or [High Glossy Paper]
• Standard: 600 x 600 dpi
• Quality: 600 x 1200 dpi (Initial setting)
• Max Quality: 1200 x 1200 dpi
9 Color Correction Mode
Configure color correction settings. For more details about the color correction, see "Color Correction" on
page 160.
• Vivid co
lors: click [Color Correction] to customize the color settings.
• ICM: click [Color Correction] to select an ICC profile.
• No composite: no color correction is applied.
10 Spot Color Setting
Select a spot color setting file. For more details about the spot color setting, see "Spot Color Settings" on
page 154.
11 Settings For Paper Handling After Print
For the Auto Cutter Model
• Cut (after printing last label)
• Cut (at specified label)
• Cut (after last page of collate page)
• Do not cut (stop at cut position) (Initial setting)
• Do not cut (stop at peel position)
• Do not cut (stop at the print end position)
For the Peeler Model
• Manual apply (Initial setting)
• Auto apply
• Rewind
If you change the [Media Type] setting, the [Print Quality] setting will automatically be
set to the initial setting suitable for the selected paper type.
• Click the [Advanced] button to configure more detailed print quality settings.
c
IMPORTANT
If you have set to [Cut (after last page of collate page)] and printing is interrupted
due to a paper jam or other reason, it is impossible to resume printing from the
stopped position.
To Next Page
Loading...
Need help?
General
