Epson Stylus Pro 4400 - Cleaning Cartridge; Maintenance Tank

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Optional Units and Consumables 112
1.7.2 Cleaning cartridge
 Type: Exclusive cleaning cartridge
 Dimension: Same as 110ml exclusive ink cartridge
 Capacity: Same as above
 Total weight: Same as above
 Effective cleaning solution: Same as above
 Environment condition: Same as above
 Storage temperature: Same as above
 Life: Same as above
1.7.3 Maintenance Tank
The maintenance tank is located in the lower space at the right side of the
printer body and constructed in such a way that the user can replace it when
"Maintenance tank full" is detected.
 Type: Special maintenance tank for waste ink
 Dimension: 102.5mm(W) x 235mm(D) x 79.5mm(H)
 Capacity: Approx. 1000ml
 Waste ink permitted limit: 650ml (excluding amount of evaporation)
 Operation environment: Operating : 10-35°C / 20-80%
Storing : -20-40°C / 20-80%
Transporting : -20-60°C / 5-85%
(Time limit of storing or transporting at 40°C
is one month. At 60°C, it is within 120 hours.)
C H E C K
P O I N T
The cleaning cartridge is the same as the 110ml ink cartridge
in shape except that it does not have the projection for a
color block.
The cleaning cartridge is used for maintenance work only.
C H E C K
P O I N T
The transfer cleaning solution of the cleaning cartridge will
freeze if left in an environment of -10°C or lower. Transfer
cleaning solution that has been frozen will require
approximately 3 hours of warming before it can be used, in
the case where it is moved from a -20°C location to a 25°C
location.