Epson Stylus Pro 4400 - PF Micro Feed Adjustment (Bi-D) (TBD)

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Advanced Adjustment 435
5.4.4 PF Micro Feed Adjustment (Bi-D) (TBD)
By using the "Paper Feed Adjuster" tool, it is possible to adjust print quality for
papers which are frequently used by users.
“Paper Feed Adjuster“ tool works as follows:
 Adjustment:
Adjusts “Paper Feed Amount“ and “Microweave“.
 Printing the set values:
Prints the calibration values that are currently applied to “Paper Feed
Amount“ and “Microweave“.
 Initialization of the set values:
Resets the calibration values applied to “Paper Feed Amount“ and
“Microweave“ to the factory default.
 Procedure
1. Turn the printer power on.
2. Start the adjustment program, and select [PF Micro Feed Adjustment
(Bi-D)].
3. Click [Run] to start the "Paper Feed Adjuster".
4. Using the "Paper Feed Adjuster" tool, adjust [Paper feeding amount]
and [Microweave].
Figure 5-91. PF Micro Feed Adjustment (Bi-D)
C H E C K
P O I N T
Refer to the help function for use of the “Paper Feed
Adjuster”.