Epson Stylus Pro 4400 - Device ID Setting; [Select Printer Name] Screen; [Port Check on Connected Printer] Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Device ID Setting 446
5.9 Device ID Setting
 Procedure
1. Turn the printer ON, and start the Adjustment Program.
2. Select the printer name.
3. Click the icon on the top left of the window.
4. Select [Port Check on Connected Printer].
5. The pop up screen to confirm the port is displayed. Click [Yes].
6. Click [Start].
Figure 5-108. [Select Printer Name] Screen
Figure 5-109. [Port Check on Connected Printer] Screen
C H E C K
P O I N T
Stylus Pro 4450/4880/4880C only.
C H E C K
P O I N T
If a connection error occurs, verify the connection between
the computer and the printer one more time, and make sure
to perform the adjustment again.