Epson Stylus Pro 4400 - Print Head Slant Adjustment (CR); Screens Shift for Print Head Slant Adjustment (CR)

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Basic Adjustment 397
5.3.9 Print Head Slant Adjustment (CR)
 Papers Required
 Size: 16"
 Type: Premium Glossy Photo Paper
 Procedure
1. Turn the printer power on.
2. Start up the adjusting program, select [Print Head Slant Adjustment (CR)] and click [Print] to print the adjustment pattern. After the printing is finished, the
Carriage Unit moves to the center of the printer (adjustment position).
3. Click [Next] (Proceed to Screen 2).
Figure 5-35. Screens shift for Print Head Slant Adjustment (CR)
To print out the adjustment pattern
The "Carriage Unit" moves
to the home position and
the paper is reeled off.
End of the
adjustment
Screen 1
Screen 2
Screen 4
Screen 3