EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 73
Paper setting and corresponding operation
NOTE: When the paper setup is set to 1 to 10 , the setting (PG position) is
prioritized and PG settings made using commands or printer
setting menu are ignored. At this time, the PG settings are not
displayed on the panel.
Paper setup Operation
Standard When each setting item values are set by commands, it follows
the command settings.
1 ~ 10 User defined paper is used and even if settings are set by
commands, user setting value is used.
To Next Page
Loading...
