Epson Stylus Pro 4400 - Check Cutting; Check Cutting Screen

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Check Results 440
5.5.5 Check Cutting
This cuts the paper and checks for cutter adjustment and cutter wear.
 Paper Used
 Size: 17"
 Type: Enhanced Matte Roll Paper
 Procedure
1. Turn the printer on.
2. Start the adjustment program and select [Cut Check].
3. Input the number of times to execute the test cut into the edit box, and
then click the [Run] button.
4. Check the cut area of the ejected paper and click the [Finish] button.
Figure 5-99. Check Cutting Screen