Epson Stylus Pro 4400 - Screws Securing Rear Side of I;H Right Unit; Screws Securing Front Side of I;H Right Unit

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 312
15. Move "Carriage Unit" to center of printer.
(Refer to "4.2.4.3 C593_SUB Board" (p234).)
16. Remove the two screws securing rear side of "I/H Right Unit".
(Refer to Figure 4-148.)
 C.B.S. 3x6: 2 pcs.
17. Remove the two screws securing the front side of "I/H Right Unit."
(Refer to Figure 4-149.)
 C.B.S. 3x12: 2pcs.
Figure 4-148. Screws Securing Rear Side of I/H Right Unit
Figure 4-149. Screws Securing Front Side of I/H Right Unit
C.B.S. 3x6
I/H Right Unit
C.B.S. 3x12
I/H Right Unit