Epson Stylus Pro 4400 - Manual Bi-D Adjustment Screen; Color Adjustment Pattern

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Adjustment Advanced Adjustment 433
9. Click [Print] to print the color adjustment patterns consist of three rows
(VSD1, VSD2, and VSD3 mode). ( )
10. Examine the printout patterns (except MK colored patterns) for each of
the three modes, and select the value for the group of most closely
aligned blocks for each mode. Input the selected value in the edit
boxes. ( )
11. After clicking [Write] ( ), make sure that the writing to the printer is
finished normally, and then click [OK]. ( )
12. Click [Finish].( )
Figure 5-86. Manual Bi-D Adjustment Screen (2)
Figure 5-87. Color Adjustment Pattern
C H E C K
P O I N T
The printed pattern is numbered on every other line,
however, you can enter the undisplayed number in between.
9
10
11
12
8
Indicates the value of the center pattern
Lc = 7 (7)