Epson Stylus Pro 4400 - Colorimetric Calibration (Color ID) Overview; Colorimetric Calibration (Color ID) Image

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Operating Principles Colorimetric Calibration (Color ID) Overview 155
2.5 Colorimetric Calibration (Color ID) Overview
This printer employs "Colorimetric Calibration (Color ID)" to correct unit-to-unit
variations in color.
"Colorimetric Calibration (Color ID)" corrects not only the weight of ink droplets
which differs according to the characteristic of individual printhead but variable
factors such as drive circuit and voltage, which provides a higher-accuracy
calibration.
OVERVIEW
1. Printing/ Mesuring the color of a correction pattern.
The calibration is performed by printing a correction pattern with a
completed product and mesuring the color of the pattern using a calibrator.
2. Writing the correction value.
Write the correction value that was calculated from the value obtained by
color mesurement to the NVRAM on the main board.
3. Reflecting the correction value.
The printer driver reads the correction value stored in the NVRAM during
printing, and correct the dot generation amount for each dot size in the
print data.
Figure 2-64. Colorimetric Calibration (Color ID) Image
Prinhead Main Board Supply Board
Main Unit
Variation of elements
in the drive control
circuit for printhead
Variation of
reference
voltage for
individual
printhead
Characteristic of
individual printhead
Colorimetric Calibration
(Color ID)
Correction of dot generation amount
Drive Control
Circuit for
Printhead
Correction of weight of
ink droplets
Printing
Result