Epson Stylus Pro 4400 - Spindle; Spindle Removal; Spindle Disassembly

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 213
4.2.2.5 Spindle
SPINDLE REMOVAL
1. Open "Cover, Roll Paper".
2. Remove "Spindle".
SPINDLE DISASSEMBLY
1. Remove "Spindle" (p213).
2. Remove "Flange, Left" (black) along with "Adapter" from the "Spindle".
3. Release hooks (4 each, 8 total) securing each "Adapter" outward and
remove the corresponding "Adapter" from "Flange, Left" and "Flange,
Right" (gray).
Figure 4-12. Spindle Removal
Figure 4-13. Spindle Disassembly
Align the marks of the flanges with the marks of the
adapters.
1
2
Cover, Roll Paper
Spindle
Step 2
Step 3-1
Step 3-1
Step 3-2
Step 3-2
Adapters
Flange, Left (black) Flange, Right (gray)