EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 206
4.2 Disassembly Procedures
C A U T I O N
Because this printer is assembled with precise
measurements in 1/100mm units, disassembly of the
frame and defined components is prohibited.
Disassembly/reassembly is limited to parts whose part
numbers are shown in the "Parts List" of Chapter 7.
(Disassembly of parts other than those listed could
result in problems that cannot be repaired except at the
factory.)
Disassembly/reassembly operations for parts/units not
listed in this "Disassembly/Reassembly" section cannot
be performed on-site.
To Next Page
Loading...
