Epson Stylus Pro 4400 - Cover, Side, Left; Cover, Side, Left Removal

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 216
4.2.3.3 Cover, Side, Left
1. Remove "Holder, Roller, Unit" (p214).
2. Remove "Paper Guide Assy., M, SP" (p215).
3. Open "Cover, Printer".
4. Remove the four screws securing "Cover, Side, Left".
 C.B.S. 3x6: 2 pcs.
 C.B.S. 3x8: 1 pc.
 C.C.P. 4x10: 1 pc.
5. While slightly lifting the upper part of "Cover, Side, Left", remove the
"Cover, Side, Left" toward left side of the main unit.
Figure 4-17. Cover, Side, Left Removal
C H E C K
P O I N T
Slightly lifting the upper part of "Cover, Side, Left" allows the
cover to be removed without interfering with the upper part
of the printer.
C.B.S. 3x8 C.C.P. 4x10
1
2
C.B.S. 3x6
Cover, Side, Left