EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Basic Specifications 24
1.2.10.2 Vibration
During operation: 0.15G, 10-55Hz X, Y, Z directions
During storage: 0.50G, 10-55Hz X, Y, Z directions
1.2.10.3 Shock
During operation: 1G, 1ms max. X, Y, Z directions
During storage: 2G, 2ms max. X, Y, Z directions
NOTE 1: Check that the printhead is capped during storage.
2: Check that the printhead is capped, then remove ink cartridges
from the body, and make sure ink cartridge cover is closed during
transport.
3: If the printer head uncapped, and the ink cartridge is attached,
switch the power ON. Switch the power OFF when capping is
completed.
4: Left out in condition of temperature under -15°C; the ink in the
printhead and ink cartridge freezes. It takes about 3 hours for the
frozen ink to be usable under the condition of 25°C.
1.2.10.4 Surrounding Space
Provide the printer with an enough surrounding space to ensure proper
installation of accessories and replacement of consumables and easy work for
daily maintenance.
From the front of the printer: 35cm or more
(When the paper tray is extended.)
From the rear of the printer: 40cm or more
(When cut sheets are set by hand
insertion from the front.)
From the both sides of the printer: 15cm or more
Figure 1-3. Surrounding Space
15cm or
more
35cm or more
40cm or
more
15cm or
more
To Next Page
Loading...
