Epson Stylus Pro 4400 - Page Lines; Level Structure of Page Line Menu

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 50
Note *: Only in this case, SN command is ignored. When paper thickness is 0.15mm,
it is operated with minimum Bi-D value and minimum SN (PG).
1.4.4.5 Page Lines
Selecting this mode allows the user to set the page line print mode. Setup is
the same as horizontal lines ON command (AC 02H 00H 00H 02H) in
automatic cutting setup. The page line is a black solid line with 1 dot width.
 Level structure of page line menu
More than
0.3mm Less
than 0.8mm
00H-08H Narrow Minimum Small
Small Small
Middle Small
Big Middle
Muximum Big
Standard Muximum Small
Small Small
Middle Middle
Big Big
Muximum Muximum
Wider Minimum Small
Small Middle
Middle Big
Big Muximum
Muximum Muximum
Widest Minimum Middle
Small Big
Middle Muximum
Big Muximum
Muximum Muximum
09H-12H - - Muximum
More than
0.81mm
- - - Muximum
Table 1-28. Relationships of PG Setting Values
Paper
thickness
sensor
PH
command
Panel SN command
Actual PG
position
[∧ / ∨]
[< / >]
[<]
PRINTER SETUP
PAGE LINE
PAGE LINE
ON
PAGE LINE
OFF
[∧ / ∨]