Epson Stylus Pro 4400 - Counter Display; Occurred Error Display; Counter Display Items and Units

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 97
Electric
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
 Counter display
The counters shown in the table below are displayed. The number is
displayed in hexadecimal.
Note *: The items except the following are set to 0 when performing counter
initialization.
Note *1: When replacing the old maintenance tank with a new one, the old value is
changed to the new one.
*2: The counter is reset when the cutter replacement sequence is performed
successfully.
*3: Counts 1 when any print start request is received.
 Occurred error display
Displays error codes of fatal errors. The latest error is 0 and 7 errors are
recoreded in 0 to 6.
CSIC
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Actuator
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Actuator2
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Fatal errors of up to 7 maintenance items recorded as history can be checked.
(CPU error is not recorded.)
Table 1-41. Counter Display Items and Units
Maintenance Unit
Waste ink
*1
0.02g
Wiper Number of times
Rubing Number of times
Paper lever UP Number of times
Front cover open Number of times
Ink lever UP Number of times
CR Motor reciprocating Number of times
PF Motor travel distance 3079.413957mm unit
Printouts (cut sheet/ roll paper) Number of print
*3
Head cleaning Number of times
A to H row ink eject Mega dot
Cut
*2
Number of times
Cutter solenoid operation Number of times