Epson Stylus Pro 4400 - Printer Setup Value Initialization

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 58
1.4.4.18 Printer Setup Value Initialization
Selecting this mode allows the user to return all printer-setting values to the
default values.
Initializing items are following;
Table 1-30. Printer Setup Value Initialization
Setting item After initialization
Remaining Paper detection Remaining roll
paper
20m
Remaining roll
paper warning
2Çç
Remaining cut
sheet
100PG
Remaining cut
sheet warning
10PG
PG setting STANDARD
Page line ON
I/F switching AUTO
Code page switching PC437
Roll paper margin setting T/B 15mm
Paper width detection ON
Paper skew detection ON
Job timeout setting OFF
Cutter position adjustment Manufacture setting
Auto margin refresh ON
Cut sheet size error ON
Auto nozzle check for each Job OFF
Super low speed cut mode OFF
Cleaning at nozzle check ON