EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 241
4.2.5 Printer Mechanism Disassembly
This section describes disassembly steps for main components of the printer
mechanism.
C A U T I O N
For the following reasons, replaceable parts are limited to
defined components. Therefore removal or replacement of
parts that cannot be supplied as components defined in this
manual or parts supplied as "Service Parts" is prohibited. (If
this is not followed, it could result in problems that cannot
be repaired except at the factory.)
1. Repair support is required on-site.
2. Components have been assembled in factory processes
using highly precise adjustments.
To Next Page
Loading...
