Epson Stylus Pro 4400 - Panel Setting Menu Item

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Product Description Operating Panel 44
1.4.4.2 Panel Setting Menu Item
Table 1-26. Panel Setting Menu Item
Top menu
(Panel display)
Item menu Panel display Setup value (Underline: Default) Ref.
Printer setting menu
(PRINTER SETUP)
Remaining paper
detection
Roll Paper ROLL COUNTER
SET ROLL LENGTH
--,15~60
~300ft
p.48
SET ROLL ALERT
3~7
~50ft
Cut Sheet SHEET COUNTER
SET SHEET PAGES
--,10~100
~250PG
SET SHEET ALERT
5~10
~50PG
PG Setting PLATEN GAP NARROW, STANDARD
, WIDE, WIDER, WIDEST p.49
Page lines PAGE LINE ON
, OFF p.50
Interface Select INTERFACE
 Stylus Pro 4400/4800
AUTO
, USB, IEEE1394, OPTION
 Stylus Pro 4450/4880/4880C
AUTO
, USB, OPTION
p.51
Code Page Switching CODE PAGE PC437
, PC850 p.51
Roll Paper Margin PAPER MARGN DEFAULT
, T/B 15mm, T/B 25mm, 15mm, 3mm p.52
Detect Paper Width PPR SIZE CHK ON
, OFF p.53
Detect Skew Error PPR ALIGN CHK ON
, OFF p.54
Job Time-out Setting TIME OUT OFF
, 30sec, 60sec, 180sec, 300sec p.54
Cutter Position Adjustment CUTTER ADJ EXEC p.55
Auto Margin Refresh REFRESH MRGN ON
, OFF p.55
Cut Sheet Size Error SHEET SIZE CK ON
, OFF p.56
Auto Nozzle Check for Each Job AUTO NZL CK OFF
, ON p.56
Cleaning Setting for Nozzle Check AUTO CLEANING ON
, OFF p.57
Super Low Speed Cut Mode setting QUIET CUT OFF
, ON
Printer Setup Value Initialization INIT SETTINGS EXEC p.58
Test print menu
(TEST PRINT)
Nozzle Check Pattern Printing NOZZLE CHECK PRINT p.59
Status Printing STATUS CHECK PRINT p.60
Job Information Print JOB INFO PRINT p.63
User Paper Setting Print CUSTOM PAPER PRINT p.65
Printer status menu
(PRINTER STATUS)
Firmware Version VERSION
 Stylus Pro 4400/4800
A0xxxx
 Stylus Pro 4450/4880/4880C
B0xxxx.XXXX
p.66
Continued on next page