Epson Stylus Pro 4400 - Page 311

EPSON Stylus Pro 4400/4450/4800/4880/4880C Revision C
Disassembly & Assembly Disassembly Procedures 311
13. Peel off the acetate tape binding the FFC to release the FFC.
(Refer to Figure 4-146.)
14. Release the four "Harness, CSIC"s and the "I/H Lever Sensor (Left)"
harness from the two clamps and the acetate tape.
(Refer to Figure 4-147.)
Figure 4-146. Releasing Harnesses_5
Figure 4-147. Releasing Harnesses_6
Step 13
Acetate Tape
Clamps
Step 14
Acetate Tape