ES910.3-A - User’s Guide 13
ETAS Basic Safety Notices
• Adhere to the maximum permissible cable lengths!
• Do not use any damaged cables! Cables may be repaired only by ETAS!
• Never apply force to insert a plug into a socket. Ensure that there is no
contamination in and on the connection, that the plug fits the socket, and
that you correctly aligned the plugs with the connection.
Requirements for the location
• Position the module or the module stack on a smooth, level and solid
underground.
• The module or the module stack must always be securely fastened.
Fixing the modules on a carrier system
• When selecting the carrier system, observe the static and dynamic forces
that could be created by the module or the module stack on the carrier
system.
Requirements on the ventilation
• Keep the module away from heat sources and protect it against direct
exposure to the sun.
• Do not stand the module on its long sides.
• Do not stand the module on its top side.
• Never place objects on top of the module.
• The free space above and behind the module must be selected so that
sufficient air circulation is ensured. Adhere to the minimum distances of at
least 10 centimeters on the sides and above the module.
• Do not operate the module in completely enclosed containers.
Heat concentration in the module possible!
The electronics can be damaged due to overheating.
Do not cover ventilation slits when setting up, assembling or connect-
ing the ES910.3-A module.
Adhere to the minimum distances at the sides and above.
Heat concentration on the long sides of the module.
The electronics can be damaged due to overheating.
Do not cover ventilation slits when setting up, assembling or connect-
ing with other modules. Adhere to the minimum distance at the sides.
To Next Page
Loading...
