evertz 3025SW - Page 189

3025SW Master Control Switching & Channel Branding
Revision 1.0 Page 175
Voiceover3RatioUp
(EMC)
N/A
Adjust VO3 ratio up.
N/A
Voiceover3RatioDown
(EMC)
N/A
Adjust VO3 ratio down.
N/A
Voiceover4RatioUp
(EMC)
N/A
Adjust VO4 ratio up.
N/A
Voiceover4RatioDown
(EMC)
N/A
Adjust VO4 ratio down.
N/A
Voiceover5RatioUp
(EMC)
N/A
Adjust VO5 ratio up.
N/A
Voiceover5RatioDown
(EMC)
N/A
Adjust VO5 ratio down.
N/A
Voiceover1Gain Up
Selected Pair or Group
Adjust VO1 input gain up.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover1Gain Down
Selected Pair or Group
Adjust VO1 input gain
down.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover2Gain Up
Selected Pair or Group
Adjust VO2 input gain up.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover2Gain Down
Selected Pair or Group
Adjust VO2 input gain
down.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover3Gain Up
(EMC)
Selected Pair or Group
Adjust VO3 input gain
up.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover3Gain Down
(EMC)
Selected Pair or Group
Adjust VO3 input gain
down.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover4Gain Up
(EMC)
Selected Pair or Group
Adjust VO4 input gain
up.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover4Gain Down
(EMC)
Selected Pair or Group
Adjust VO4 input gain
down.
Note: If multiple
channels are set then
tally will not show on the
button.
Voiceover5Gain Up
(EMC)
Selected Pair or Group
Adjust VO5 input gain
up.
Note: If multiple
channels are set then
tally will not show on the
button.