Setting Up Copper Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 101
Saving Results
Save Result
Select Result File button displays a list of existing file names
where you can save your results.
Result File Storage Location gives you the option of storing results
either in the MaxTester internal memory or USB device. The
default selection comes from Application Settings/General tab.
Result File Name allows you to preview and edit the result file
name. The proposed file name is based on current auto-naming
parameters configured in Setup/Application Settings/File Name.
Save button confirms if the Result File Name is saved successfully.
Export Report
Report File Storage Location is dependent on whether Export to
EXFO Connect Client is enabled or not, in System
Settings\Upload Setup. If enabled, you can select either USB or
EXFO Connect Client as your test report storage location. If
disabled, USB is automatically selected.
Report Format is HTML, MHTML, or XML.
You can generate and export HTML, MHTML, or XML reports from
any saved test result.
Note: If EXFO Connect Client is selected, the available selections for Report
Format are only MHTML and XML.
Reports include:
General Information including Pass/Fail status.
Identification
Profile/Result Summary
Blank entries for your Signature and the Date.
To Next Page
Loading...
