Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 415
17 Maintenance
General Maintenance
The MaxTester has been designed to be a rugged and lightweight piece of
test equipment. The MaxTester LCD display should only be cleaned using a
soft, lint-free cloth and an anti-static cleaning solution. Ordinary detergents
and other cleaning solutions may cloud or scratch the surface and should
be avoided.
To help ensure long, trouble-free operation:
Keep the unit free of dust.
Clean the unit casing and front panel with a cloth slightly dampened
with water.
Store unit at room temperature in a clean and dry area. Keep the unit
out of direct sunlight.
Avoid high humidity or significant temperature fluctuations.
Avoid unnecessary shocks and vibrations.
If any liquids are spilled on or into the unit, turn off the power
immediately and let the unit dry completely.
WARNING
The use of controls, adjustments and procedures other than those
specified herein may result in exposure to hazardous situations or
impair the protection provided by this unit.
To Next Page
Loading...
