Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 113
7 Multimeter Tests
The purpose of the Multimeter tests function is to detect AC/DC voltages
and currents, measure resistance and capacitance in a loop, and stress test
the loop.
To access Multimeter tests:
From the Copper Main pane, highlight Multimeter and press to open
the Multimeter menu.
Multimeter Main Page
Multimeter tests allow you to do the following:
make basic electrical safety checks (AC volts)
check for crossed or coupled battery voltages
assess basic loop continuity
balance loop quality with resistance measurements
measure total electrical length with capacitance
measure the ground path resistance with the station ground test
run a stress test.
Pair Detective runs many of these tests automatically and is a
recommended starting test to assess loop quality and identify common
faults.
To access Pair Detective from Multimeter tests:
1. Press
to return to the Copper Main menu.
2. Highlight Pair Detective and press
to launch the test.
To Next Page
Loading...
