EXFO MaxTester 635G - LED Statuses

Troubleshooting
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 425
LED Statuses
LED Statuses
The left-side power and right-side battery LEDs are used to indicate
specific statuses of your unit. If you notice that one of the LEDs displays a
particular status, please see the table below to determine what could be
causing it.
LED Legend
Power
State
Power
Source
Charger
State
Battery Level
Power LED
Single-
Battery Pack
Power LED
Dual-
Battery Pack
Battery LED
ON
DC
Error N/A
Solid green Solid yellow
Red
Charging N/A Green blinking
Charged Full Solid green
Battery N/A
< 13 %
Solid yellow Solid yellow
Red blinking
 14 % - < 37 % Yellow blinking
 38 % - < 62 % Yellow
> 63 % Solid Green
Fake
suspend
a
a. Fake Suspend -- When AC/DC is plugged in, MaxTester will simulate the suspend mode by turning off the
display in order to facilitate the charge.
DC
Error N/A
Solid green Solid yellow
Red
Charging N/A Green blinking
Charged Full Solid green
Suspend Battery N/A N/A Yellow blinking Yellow blinking Black
OFF Battery N/A N/A Black Black Black