Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 371
15 Running DSL/IP Tests and
Viewing Results
The MaxTester is designed to make DSL/IP turn-up easy. The unit will
emulate an customer CPE modem to the point that it can handshake and
connect with an DSLAM and report the upstream and downstream
parameters. Simply connect to the line, turn on the MAX-635G, and select a
test to run. Results obtained include upstream and downstream
throughput and noise margin.
To activate a test:
1. Press the left/right, up/down arrow keys on the keypad to select the
desired test icon.
2. Press to start the test.
To Next Page
Loading...
