Copper Auto Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 307
User Auto Test
Result File Name previews the result file name which consists of
the Circuit ID, date and time as configured in System
Settings/Date and Time, and version number if there are multiple
versions with the same filename.
Upload & Save button initializes the result file upload and
confirms if the Upload File Name is saved successfully.
Save button confirms if the Result File Name is saved successfully.
Export Report
Report File Storage Location is dependent on whether Export to
EXFO Connect Client is enabled or not, in System
Settings\Upload Setup. If enabled, you can select either USB or
EXFO Connect Client as your test report storage location. If
disabled, USB is automatically selected.
Report Format is HTML, MHTML, or XML.
You can generate and export HTML, MHTML, or XML reports from
any saved test result.
Note: If EXFO Connect Client is selected, the available selections for Report
Format are only MHTML and XML.
Reports include:
General Information including Pass/Fail status.
Identification
Profile/Result Summary
Blank entries for your Signature and the Date.
Report File Name previews the result file name which consists of
the Circuit ID, date and time as configured in System
Settings/Date and Time, and version number if there are multiple
versions with the same filename.
To Next Page
Loading...
