Setting Up the MAX-635G
26 MAX-635G
Display and Language
select Yes or No. This screen will automatically display during power
up, if calibration was never conducted and the data file is not available
in memory.
To Enable Screenshots, select Enabled (default), then the
Screenshot file format in either JPG (default) or GIF, and where you
would like to Save Screenshot to: USB (default), EXFO Connect
Client, or FTP.
If USB, the image is saved to a directory called
\\MaxTester\Screenshots on the USB memory device. If the
directory does not exist, create it on the root directory of the USB
memory device.
Note: If you selected USB as the screenshot file location and no USB is connected
to the MaxTester, the following popup message is displayed: Screenshot
not saved, Insert USB and press "Yes" to save it or press "No" to
continue to Help.
If EXFO Connect Client, the image is saved to
\\DATA\EXFO\ECC\FileUpload and the EXFO Connect Client (ECC)
manages the screenshots (for example delete). No change to ECC
is required.
If FTP, the image is saved locally to \\DATA\MaxTester\FTPUpload.
From Result Manager\Upload\Upload Location, select FTP to
enable uploading screenshot images to the FTP server. If you
select USB as the Upload Location, the image is uploaded to
Removable Disk\MaxTester\Screenshots.
From the DSL Upload/Save Result tab, select In-Band Upload &
Save button to save screenshots.
Note: FTP is available only if you have the FTP Result Upload option listed in
System Settings\Software Options\Platform Options.
To Next Page
Loading...
