Setting Up DSL/IP Tests
360 MAX-635G
Setup
Port to use (MAX-635G-GVXAA and GVXAB models only) determines
which port(s) the DSL tests will use on your unit:
RJ is RJ14 and if selected, you must connect the line under test to
the RJ DSL port.
Copper means copper ports and if selected, you must connect the
line under test to the Tip/A and Ring/B connectors.
See Cable Connections on page 8 for more information on connecting
to your unit.
If your modem is V2XAB/GVXAB, then DSLAM entry is visible and
allows you to choose the following:
Annex B
UR2
Annex B and UR2
To access the modem settings:
1. From , select DSL/IP Tests, Setup, and then Modem Settings.
2. Use the up/down arrow keys to select the setting to change.
3. Press to view the list of available choices or use the left/right arrow
keys.
4. Press to confirm.
To Next Page
Loading...
