EXFO MaxTester 635G - Page 38

Setting Up the MAX-635G
28 MAX-635G
Display and Language
 Device Name (Bluetooth Address) displays the name of the
device and its Bluetooth address.
 A third, right-hand column displays a checkmark if the device is
Paired.
Note: Use only an EXFO certified Bluetooth dongle.
To initiate remote display:
1. Connect the Bluetooth Dongle or USB Connection to a USB port on the
MaxTester.
2. Select the Connect to Device and press the up arrow key to highlight
and press the Enable Remote Display button.
OR
3. Press the down arrow key to highlight and press the Find Bluetooth
Devices button to search for available Bluetooth devices.
4. Press the down arrow key to highlight the list box and press
to get
into the list.
5. In the list, press the up/down arrows to select a device to pair.
6. Follow the instructions in the pop-up dialog boxes. Only one device
can be paired at a time in the MaxTester.
7. Once you have connected to your device, press
to come out of the
list.
8. Return to step #2 above to select your Bluetooth device and establish
the VNC connection.