Setting Up Copper Tests
Copper and G.fast/VDSL2/ADSL2+ Multi-play Test Set 53
Test Configuration
Copy to USB allows you to copy all profiles found in the internal
memory to an external USB device. If the profile name already exists in
the destination folder, you will prompted to overwrite existing
profile(s).
You can overwrite each file individually by pressing the Yes button,
or overwrite all by pressing Yes to All.
If Yes to All is not pressed, then individual files may be overwritten
by pressing Yes, or skipped by pressing No.
You can terminate the process by pressing Cancel.
Copy from USB allows you to copy all profiles found on an external
USB device to the unit.
Delete Profile allows you to delete a profile (except the default profile)
on the unit.
Profile Default resets the current test setup to the factory default
profile. If selected, a dialogue box pops up to confirm that all single
and auto test settings will revert to factory test settings.
Save Profile allows you to save changes made to selected profile. An
asterisk "*" on the Selected Profile name indicates that modifications
have been made in the Threshold Settings or parameters of a
particular test. the following function keys.
To save a profile, use one of the following function keys:
Save allows you to save to the currently selected profile name.
Save As opens the alphanumeric editor screen allowing you to
enter a new name for the profile selected.
Don’t Save deletes the message box without saving the changes to
the currently selected profile.
To Next Page
Loading...
