Festo SPC200 - Page 103

2. Project management
2−27
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
To print the contents of open program editor windows, posi
tion list windows and graphics windows:
1. Make sure that the window you wish to print is active.
2. Select one of the commands [Program], [Position list] or
[Graphic] from the [File] [Print] menu, depending on the
active window.
3. Check the settings in the Print" dialogue
window and
start printing with OK".
To print the hardware overview:
1. Select [Hardware] from the [File] [Print] menu.
2. Check the settings in the Print" dialogue window and
start printing with OK".
To print all open graphics:
1. Select [Allgraphics] from the [File] [Print] menu.
2. Check the settings in the Print" dialogue window and
start printing with
OK".