4. Commissioning positioning systems
4−41
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
To download a project into the SPC200:
1. Select [Online mode] from the [Online] menu or click on
the Online mode on" button in the toolbar to activate
Online mode.
2. Click on [Project] in the [Online] [Download] menu.
3. Read the warning displayed. You can load the project into
the SPC200 with Continue". You can terminate
the pro
cedure with Cancel".
The progress of data transmission can be seen in a window as
the project is downloaded to the SPC200. The two bars show
the progress of transmission as a percentage. The upper bar
represents the complete project, the lower one shows the
project component currently being transmitted.
If an
error occurs during transmission, acknowledge the
message and repeat the download.
To Next Page
Loading...
